topic Re: ILO - Slot 255 is not responsive. in Servers - General

ILO - Slot 255 is not responsive.

GaryHe — Mon, 07 Dec 2020 14:24:53 GMT

Hello

I hope this is not a stupid question since I am new to this formum and ILO in general but I am getting these errors (a lot of them) and it does not give me much informaiton as to what it is or where to look to fix it. I am hoping the experts here can help me

thanks

The iLO health monitoring status of the device / adapter located in Slot 255 is not responsive.

Initial Update 12/07/2020 12:35:26 Event Class 0x23 Event Code 0x484

Gary

Re: ILO - Slot 255 is not responsive.

Ash_1711 — Sat, 12 Dec 2020 09:21:51 GMT

Hi Gary,

These alerts are captured from The iLO health monitoring status & are false caution messages.

Solution:

>ILO5 firmware 2.30 fixed the issue.

Advisory: HPE Integrated Lights-Out 5 (iLO 5) - False Caution Message, "The iLO Health Monitoring Status of the Device / Adapter Located In Embedded Is Not Responsive" May Display Constantly In the iLO 5 Event Log
https://internal.support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102190en_us\

Regards

HPE

Re: ILO - Slot 255 is not responsive.

Anand1202 — Mon, 10 Jan 2022 08:23:47 GMT

I am running iLO5 firmware version 2.55 and 2.60 and also see this event approx. once a day in the iLO Event Log:

"The iLO health monitoring status of the device / adapter located in Slot 255 is not responsive."

Re: ILO - Slot 255 is not responsive.

JoseAlves — Tue, 11 Jan 2022 17:35:16 GMT

I am also with this problem in 3 HPE DL 380 Gen10 with ILO 2.55 and ILO 2.60 ( i i had upgraded from 2.55 to 2.60 to see if this issue goes away but no results). on a server I downgraded from ILO 2.60 to 2.48, and this error occurred once in about 24h... any help?

Re: ILO - Slot 255 is not responsive.

bjcabraatz — Fri, 21 Jan 2022 16:37:46 GMT

This is occuring for use as well. HP GEN 10 DL380. ESXi 6.7

The iLO health monitoring status of the device / adapter located in Slot 255 is not responsive.

Fiber Channel HBA

Product Name
ProLiant DL380 Gen10
System ROM
U30 v2.54 (09/03/2021)
System ROM Date
09/03/2021
Redundant System ROM
U30 v2.36 (07/16/2020)

ILO5 - iLO health monitoring status of the device / adapter located ... not responsive

eYc — Tue, 22 Feb 2022 14:03:07 GMT

Hello,

I also got this Message "The iLO health monitoring status of the device / adapter ... is not responsive" on an DL380 Gen10 with iLO 2.55, BIOS 2.36, Intelligent Provisioning 3.46 running Red Hat Enterprise Linux 7.9, for four devices, all at once, at the same time & date.

Event Log said at 04/04/22, 10:17:

5037 The iLO health monitoring status of the device / adapter located in Slot 4 is not responsive.
5036 The iLO health monitoring status of the device / adapter located in Embedded Ethernet 05 is not responsive.
5035 The iLO health monitoring status of the device / adapter located in Slot 6 is not responsive.
5034 The iLO health monitoring status of the device / adapter located in Slot 1 is not responsive.

The server crashed once, five days before these events were logged, and we don't know if it has anything to do with it.

I updated BIOS and Firmware with SPP 2021-10, Intelligent Prov. 3.70, disabled MCTP followed by MCTP-Reset and iLO Reboot (so MCTP was enabled again in iLO-Devices/Discovery), and i hope that solved the issue.

Re: ILO - Slot 255 is not responsive.

Lori69 — Fri, 27 Oct 2023 04:46:41 GMT

@GaryHe wrote:

Hello
I hope this is not a stupid question since I am new to this formum and ILO in general but I am getting these errors (a lot of them) and it does not give me much informaiton as to what it is or where to look to fix it. I am hoping the experts here can help me

thanks

The iLO health monitoring status of the device / adapter located in Slot 255 is not responsive.

Initial Update 12/07/2020 12:35:26 Event Class 0x23 Event Code 0x484

Gary

To avoid the false caution messages, update to iLO 5 v2.30. As a workaround, if the system is functioning as expected, ignore the caution messages.

Re: ILO - Slot 255 is not responsive.

RLAG-IT — Tue, 08 Mar 2022 15:57:08 GMT

I have the same problem after updating to ilo 2.55.

Every day at this time, the fans are running with 100% for some seconds.
Customer is not happy about the noise.

Is there any solution now?

Re: ILO - Slot 255 is not responsive.

Bob Curnock — Tue, 05 Apr 2022 09:06:06 GMT

I am seeing this after upgrading to ilo 2.48 firmware - can't upgrade any higher due to the OneView/ilo firmware issue which is not yet fixed

Re: ILO - Slot 255 is not responsive.

tunguyenamj — Mon, 25 Apr 2022 03:19:32 GMT

Same issue with my DL360 gen10 server.

iLO 5 v2.55p23

ROM U32 v2.54

"The iLO health monitoring status of the device / adapter located in Slot 255 is not responsive" happen once every two days at fixed time 7:00 AM

Re: ILO - Slot 255 is not responsive.

jscooper22 — Tue, 03 May 2022 17:54:39 GMT

Hi,

Glad I stumbled on this thread, thought I was missing something obvious. Every day at 13:45 EDT, our fans also ramp up for a few seconds before going down.

Event in log:

"The iLO health monitoring status of the device / adapter located in Slot 255 is not responsive"

Recommended Action: "Do one or more of the following: 1.Disable the MCTP and wait for 2 minutes. Enable the MCTP in iLO 2.Perform the iLO reset. 3.Perform the server reboot. If the issue still persists contact support"

We're on iLO 5, v2.55, ProLiant DL380 Gen10

I looked up what a MCTP was, how to disable it, followed the directions here:

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102190en_us

But today (24 horus later), the fans ramped up again. I'll contact support per their recommendation and see what they say.

Thanks,

Jeff

Re: ILO - Slot 255 is not responsive.

Justus J. Addiss — Thu, 05 May 2022 21:27:08 GMT

I just upgraded from 2.63 to 2.65 and I'm getting this error again. I had it several months ago but resolved it. Now it's happening again.

162606 The iLO health monitoring status of the device / adapter located in Slot 255 is not responsive. 05/05/2022 19:47:36 1 Hardware, Administration

iLO Firmware Version 2.65 Feb 23 2022

U30 v2.58 (11/24/2021)

Any solutions other than iLO firmware upgrade to 2.30 which clearly does not solve the issue?

Re: ILO - Slot 255 is not responsive.

HPEGuy — Tue, 18 Oct 2022 00:37:56 GMT

Upgraded ML350 G10 to 2.72, random warnings about device in slot 255 being unresponsive are back.

Re: ILO - Slot 255 is not responsive.

Justus J. Addiss — Tue, 18 Oct 2022 12:47:40 GMT

I am also seeing these messages about Slot 255 on a DL380 G10 iLO running 2.72:

<hostname> iLO5 The iLO health monitoring status of the
device / adapter located in Slot 255 is not responsive. ACTION: Do one or
more of the following:#0121.Disable the MCTP and wait for 2 minutes. Enable
the MCTP in iLO#0122.Perform the iLO reset.#0123.Perform the server reboot.
If the issue still persists contact support

I was getting one a day until I rebooted the system after this months Microsoft patch release. I have not seen one since.

Re: ILO - Slot 255 is not responsive.

Dps-hitachi — Fri, 07 Apr 2023 16:15:09 GMT

We are getting similar events in ILO 6 also,

The iLO health monitoring status of the device / adapter located in Slot 3 is not responsive.

Server model DL380 Gen11

Re: ILO - Slot 255 is not responsive.

Sunitha_Mod — Mon, 10 Apr 2023 06:08:26 GMT

Hello @Dps-hitachi,

Thank you for posting! Since you have posted in an old topic and there is no response yet, I would recommend you create a new topic using the create "New Discussion" button, so the experts can check and assist you further.

Re: ILO - Slot 255 is not responsive.

ferrieux — Thu, 26 Oct 2023 18:18:18 GMT

I have this issue every 15mn30s on a DL380 Gen10plus, with iLO5 v2.95.

And every time this event fires, the OS (Linux) experiences a temporary kernel freeze of all cores during ~800ms.

Please how could we investigate ? What device is on slot 255 ?

Re: ILO - Slot 255 is not responsive.

BobC2 — Fri, 27 Oct 2023 08:03:38 GMT

This has been sporadically occurring on servers I support for a couple of years now whilst working for 2 different companies - have HPE EVER sorted what is causing it - seems not if still prevelant now!

Re: ILO - Slot 255 is not responsive.

ferrieux — Fri, 27 Oct 2023 09:21:21 GMT

Hi Bob,

Yes, this is a serious worry for us, and because of this we're considering switching over to competitors for all our servers.

Indeed, while the issue could (arguably) be dismissed before as "false alarm - please ignore", the 800ms freeze of the OS is not something that can be tolerated in production.

Re: ILO - Slot 255 is not responsive.

blue2u — Thu, 16 Nov 2023 15:19:02 GMT

This HPE customer advisory article (a00121346) describes an Innovation Engine firmware update to solve the temporary kernel freeze of all cores, depending on HPE server platform.: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00121346en_us