topic Re: UPS R6000 in Servers - General

UPS R6000

cedistel — Sat, 20 Jul 2024 07:37:33 GMT

Hi,

R6000 UPS come by default with 4mm² cables. I believe it is a 32A output but these cables only allow 16A. Is it possible to change for a 6mm² cable?

Thanks,

Re: UPS R6000

Suman_1978 — Mon, 16 Sep 2024 09:21:12 GMT

Hi,

What is the UPS model or part number?
I got the part number as Q7G11A which is a HPE G2 R6000/60309 3-wire 32A/230V Outlets (4) C13 (4) C19 (1) IEC 32A/3U Rackmount INTL UPS.
Also refer to Model matrix - HPE G2 R5000, R6000, and R8000 UPS models.

Please check the QuickSpecs and matrix page to see if the cable you are referring is compatible.

Thank You!
I work with HPE but opinions expressed here are mine.

Re: UPS R6000

cedistel — Mon, 16 Sep 2024 09:34:58 GMT

Hi @Suman_1978 ,

Yes, that would be the Q7G11A. Thanks for the link. My question would be: is it possible to change the 4mm² cable to a 6mm² cable? This is not an option in Quickspec. Would it still be under warranty if we decide to make the change?

Thanks for your help.

Re: UPS R6000

Suman_1978 — Mon, 16 Sep 2024 09:32:12 GMT

Hi,

If 6mm² cable is not listed, I presume its not compatible.
I would suggest you to contact a HPE Reseller or HPE Support to get more clarity on this issue, including warranty question.

Thank You!
I work with HPE but opinions expressed here are mine.

Re: UPS R6000

Suvamay — Sat, 20 Jul 2024 07:36:03 GMT

All listed spares are there in quick specs. Beyond that HPE has not tested beyond anything.