topic iLO VS PRTG in Servers - General

iLO VS PRTG

Mawuena — Fri, 20 Dec 2024 07:52:39 GMT

Hello,

iLO is seeing everything fine. However, PRTG is detecting issues on the proliant server.

Please, can someone helps me compare iLO vs PRTG on hardware management.

Best regards,

Re: iLO VS PRTG

Supreeth_B — Fri, 20 Dec 2024 05:35:52 GMT

Hi @Mawuena,

When it comes to hardware management for Proliant Servers, iLO would be the most reliable source for any hardware-related alerts.
You can refer this Link to learn more on iLo.

Hope this information has helped you, Please click on the "Thumbs Up/Kudo" icon as a token of appreciation. Also, if this post has helped to solve your issue, consider marking this as an "Accepted Solution".

Regards,
Supreeth.

Query: iLO VS PRTG

support_s — Fri, 03 Jan 2025 06:35:24 GMT

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: iLO VS PRTG

shiva_jr — Sun, 05 Jan 2025 07:36:48 GMT

Hi @Mawuena
Can you please post us the issue detected over PRTG?
Are you using the PRTG application, added HPE server and added all 5 sensors?
Actually, you have to refer the iLO events and logs. Iit is HPE standard interface tool to configure and monitor the server.
if any notification in PRTG about hardware issues, you can run 'Embedded diagnostics' to get the issue detail.

Please mark as 'Accepted solution' and give 'Kudos' if my post worked.

Regards,
Shiva_jr