topic Re: Query: SUM 11.2 can not connect to iLO. in Servers - General

SUM 11.2 can not connect to iLO.

v_tibi2 — Wed, 19 Mar 2025 03:39:27 GMT

I plan to upgrade our DL360 gen10 ang gen11 servers FW version to SPP 250100 level, and I realised, that the new SUM version 11.2.0 not able to connect to iLO. I got an error message, that I should check firewall settings. From the same server, with the same settings SUM version 11.0.0 run withouth any problem. Does anybody know what was the change between the two SUM version, why this issue is appears?

Query: SUM 11.2 can not connect to iLO.

support_s — Mon, 17 Mar 2025 12:45:40 GMT

System recommended content:

1. HPE iLO 5 Security Technology Brief | iLO Service Port

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: Query: SUM 11.2 can not connect to iLO.

v_tibi2 — Mon, 17 Mar 2025 13:37:08 GMT

The linked topic does not related to my question.

Re: SUM 11.2 can not connect to iLO.

shiva_jr — Mon, 17 Mar 2025 16:12:40 GMT

Hi @v_tibi2 ,
As per the User guides of HPE SUM version 11.0.0 and 11.2, there is no difference between the ports used.
Following are some steps to troubleshoot-
1) Please check the have you changed any network configuration of iLO, there may difference in Subnet mask, Gateway IP, DNS IP etc.
2) Run the command netstat -ano to check is the server using the ports 63001 and 63002.
3) If ports are in use, please kill that process/task using windows task manager.
I hope, my post helps in resolving your issue. if yes, please give kudos and mark my post as Accepted Solutions.

Regards,
Shiva_jr

Query: SUM 11.2 can not connect to iLO.

support_s — Fri, 21 Mar 2025 09:43:15 GMT

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".