https://community.hpe.com/t5/servers-general/hp-700-70-question/m-p/3449710#M2713 If you are programming the keys from the keyboard (not from a program or script), then turn on DISPLAY FUNCTIONS (the same keyset as REMOTE MODE). Now the ESC key will show up as a miniature EC. Turn it off after you are done or all the text from the computer will have CR LF etc showing up.<BR /> <BR />Note that manually programming the keys is OK for testing but in a production environment, I would create a program or script to download the keys as needed. Thu, 23 Dec 2004 22:21:01 GMT Bill Hassell 2004-12-23T22:21:01Z https://community.hpe.com/t5/servers-general/hp-700-70-question/m-p/3449709#M2712 I have an HP 700/70 terminal. I'm programming function keys in the terminal setup and need to know how to get the "ESC" character to show. When I go to program the key and hit the ESC key, the terminal just beeps. Help please?? Thu, 23 Dec 2004 09:37:46 GMT https://community.hpe.com/t5/servers-general/hp-700-70-question/m-p/3449709#M2712 Grant Willey 2004-12-23T09:37:46Z https://community.hpe.com/t5/servers-general/hp-700-70-question/m-p/3449710#M2713 If you are programming the keys from the keyboard (not from a program or script), then turn on DISPLAY FUNCTIONS (the same keyset as REMOTE MODE). Now the ESC key will show up as a miniature EC. Turn it off after you are done or all the text from the computer will have CR LF etc showing up.<BR /> <BR />Note that manually programming the keys is OK for testing but in a production environment, I would create a program or script to download the keys as needed. Thu, 23 Dec 2004 22:21:01 GMT https://community.hpe.com/t5/servers-general/hp-700-70-question/m-p/3449710#M2713 Bill Hassell 2004-12-23T22:21:01Z