https://community.hpe.com/t5/servers-general/blue-screen-trap/m-p/3489746#M2865 Good Morning,<BR /><BR />This previous weekend one of my servers dropped twice. The Hp Management agent has the following events listed,<BR /><BR />1 <BR />POST Error: 1792-Drive Array Reports Valid Data Found in Array Accelerator 2/20/2005 4:30PM 2/20/2005 4:30PM 1<BR /><BR />2 <BR />Blue Screen Trap (BugCheck, STOP: 0x0000000A (0x00000000, 0x00000002, 0x00000000, 0x80533440)) 2/20/2005 4:29PM 2/20/2005 4:29PM 1<BR /><BR />3 <BR />Blue Screen Trap (BugCheck, STOP: 0x0000008E (0xC0000005, 0x8058E41A, 0xF5FAB90C, 0x00000000)) 2/19/2005 9:25AM 2/19/2005 9:25AM 1<BR /><BR />I believe the first is fine. This means that data that was not written to the array is saved when the machine is restarted. <BR /><BR />The second usually refers to a hardware failure. However there is no software being displayed as failed. However MS Windows patches were applied on Friday night.<BR /><BR />The last is known to occur from memory module errors.<BR /><BR />This makes sense as both of them refer to hardware problems. However the systems management does not show any hardware failures. <BR /><BR />Does anyone have any further information regarding these errors?<BR /><BR />Thanks<BR />Richard<BR /> Mon, 21 Feb 2005 03:17:01 GMT Richard Thompson_8 2005-02-21T03:17:01Z https://community.hpe.com/t5/servers-general/blue-screen-trap/m-p/3489746#M2865 Good Morning,<BR /><BR />This previous weekend one of my servers dropped twice. The Hp Management agent has the following events listed,<BR /><BR />1 <BR />POST Error: 1792-Drive Array Reports Valid Data Found in Array Accelerator 2/20/2005 4:30PM 2/20/2005 4:30PM 1<BR /><BR />2 <BR />Blue Screen Trap (BugCheck, STOP: 0x0000000A (0x00000000, 0x00000002, 0x00000000, 0x80533440)) 2/20/2005 4:29PM 2/20/2005 4:29PM 1<BR /><BR />3 <BR />Blue Screen Trap (BugCheck, STOP: 0x0000008E (0xC0000005, 0x8058E41A, 0xF5FAB90C, 0x00000000)) 2/19/2005 9:25AM 2/19/2005 9:25AM 1<BR /><BR />I believe the first is fine. This means that data that was not written to the array is saved when the machine is restarted. <BR /><BR />The second usually refers to a hardware failure. However there is no software being displayed as failed. However MS Windows patches were applied on Friday night.<BR /><BR />The last is known to occur from memory module errors.<BR /><BR />This makes sense as both of them refer to hardware problems. However the systems management does not show any hardware failures. <BR /><BR />Does anyone have any further information regarding these errors?<BR /><BR />Thanks<BR />Richard<BR /> Mon, 21 Feb 2005 03:17:01 GMT https://community.hpe.com/t5/servers-general/blue-screen-trap/m-p/3489746#M2865 Richard Thompson_8 2005-02-21T03:17:01Z