topic Re: Unable to run HP Power Device Flash Utility in Servers - General

Unable to run HP Power Device Flash Utility

Martin Merck — Wed, 26 Jan 2011 19:41:29 GMT

I have a R5500XR UPS and added a SNMP management card.
The card came with an outdated firmware (1.20.08) which
I need to update to make it compatible with my other UPSes.
(Need of support of new SNMP MIB for monitoring)

I downloaded the most recent softpaq of the
HP UPS Management Module Firmware 2.1.3 which includes
HP Management Flash Utility 3.0.3.
If I try to run this utility (on Windows 7 or WindowsXP) it stops immediately with an error and trying to send a report to Microsoft.
The error report contains the following Error signature:
----------------------------------------------
EventType : clr20r3 P1 : hp power device flash utility P2 : 3.0.3.0
P3 : 4c93a0ac P4 : system.windows.forms P5 : 2.0.0.0 P6 : 4889dee7
P7 : 2328 P8 : 5d P9 : system.argumentoutofrange

This seemsto be a software error.
How can I get the UPS managment module flashed?

Re: Unable to run HP Power Device Flash Utility

Brian Vo — Thu, 27 Jan 2011 00:14:52 GMT

Hi,

Let try with the lastest version 3.0.6
See attachment

Re: Unable to run HP Power Device Flash Utility

Martin Merck — Thu, 27 Jan 2011 01:02:59 GMT

Thanks for the new versiom.

However it shows the exact same problem.
Do you now which version of the .NET framework this needs?

I have installed:

Microsoft .NET Framework 1.1
Microsoft .NET Framework 2.0 Service Pack 2
Microsoft .NET Framework 3.0 Service Pack 2
Microsoft .NET Framework 3.5 SP1
Microsoft .NET Framework 4 Client Profile
Microsoft .NET Framework 4 Extended

(most of these came through automatic updates)

Re: Unable to run HP Power Device Flash Utility

Thomas E Townsend — Thu, 03 Feb 2011 16:59:32 GMT

Hello. I'm having the same problem as well on XP. I've tried verion 3.0.5 and 3.0.6 but still get the same problem.

Re: Unable to run HP Power Device Flash Utility

Thomas E Townsend — Thu, 03 Feb 2011 17:07:54 GMT

I tried version 3.0.3 on another PC in desperation and the software ran fine on it.

Re: Unable to run HP Power Device Flash Utility

Zygmunt Krawczyk — Thu, 03 Feb 2011 17:19:30 GMT

I can run HP Management Flash Utility 3.0.3 on XP without any problem. I have installed

Microsoft .NET Framework 1.1
Microsoft .NET Framework 2.0 Service Pack 2
Microsoft .NET Framework 3.0 Service Pack 2
Microsoft .NET Framework 3.5 SP1

Re: Unable to run HP Power Device Flash Utility

Martin Merck — Tue, 08 Feb 2011 23:29:02 GMT

Ok,

after lots off trail and error, I found out the problem and how to solve it.
The software needs that the system has a serial port. In my case (MacBook Pro running bootcamp) this is not the case. I planned to use the ftp flash method so this should work without an COM port, but the UI will not start.
After installing windows on a VM (I use VirtualBox) running from inside my MacOSX I could simulate a virtual COM port for that VM (attached to a file).
After adding the new hardware with "Control Panel/Add Hardware" I was able to add a serial port to that windows instance. After that the application runs.
The problem is clearly that the Windows forms tries to fill a dropdown list with COM ports which can't be filled with 0 ports.

Re: Unable to run HP Power Device Flash Utility

Thomas E Townsend — Thu, 10 Feb 2011 16:14:23 GMT

By pure chance the other computer I got the software to run on had a serial port. At least now we know.

Re: Unable to run HP Power Device Flash Utility

sszyman — Mon, 28 Mar 2011 10:47:28 GMT

I confirm that connecting USB-to-serial adapter to USB port solves the problem with running flash utility; worked for me.