topic Re: IP console switches in Servers - General

IP console switches

chris harrington_5 — Tue, 15 Jan 2008 15:26:31 GMT

Hi
I have 2 older ip console switches a 1x1x16 and a 3x1x16. These were installed some time ago and the admin name and password have been lost. Is there a mechanism whereby i can reset to factory default (admin/blank) via serial cable.
regards

Re: IP console switches

Mi6t0 — Tue, 15 Jan 2008 16:05:36 GMT

Hello,

You can try this:

Situation/Action: Password is set and then lost. To resolve this issue, have the user complete the following steps:

1. Connect to the console serial switch.
2. Enter 5 on the main menu to restore the factory defaults, which includes resetting to the original User Name and Password (Admin/blank).

Regards,

Re: IP console switches

chris harrington_5 — Fri, 18 Jan 2008 11:41:41 GMT

Ta muchly

Re: IP console switches

chris harrington_5 — Fri, 18 Jan 2008 11:42:37 GMT

forum member supplied solution