UPS Management Module, lost functionality after firmware update

Rusty04 — Wed, 07 Sep 2011 09:22:40 GMT

After updating firmware to 2.1.11 on an AF401A UPS Management Module, I can no longer add or edit currently attached devices nor can I control any of the load segments (power on/off/cycle) via the HTTP web interface. I can connect to the management module via the web interface & it shows the correct parameters for the UPS (mains & battery voltages, load etc),

I can add/edit & control devices attached to the UPS by telnet & via the configuration port with Hyperterm. I have done a “Restore Configuration to Manufacturer Settings” after updating firmware.

Hardware information

Management Module

Firmware Value

------------ --------

Net+OS: 7.2

Application: 2.1.11

HTTP: 4.04 PBuilder

BSP: 1.4.2

Bootloader: 1.4.2

Compiler: 3.4 (gcc)

UPS:

Model: T1000XR

Version: 2.03

Is there anything else I can do to restore full functionality to the card?

Thanks

Ian

topic UPS Management Module, lost functionality after firmware update in Servers - General

UPS Management Module, lost functionality after firmware update