https://community.hpe.com/t5/servers-general/server-console-switch-1x8-problem/m-p/350548#M6730 <P>We have may of these switches and from time to time we find some that when connected to a TFT5600 and turned on shift the screen image over to the right about 1/2". This can be temp. fixed by reseting to factory settings on the TFT but when you close the TFT and open it again (on/off/on) it reverts back to the shifting problem.<BR />When I looked for a software update there is not one. Kind of makes the serial port useless! Suggestions?</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved from Servers &gt; Appliance Servers to Servers &gt; general - HP Forums Moderator</P> Fri, 23 Nov 2012 02:28:58 GMT CA1113633 2012-11-23T02:28:58Z https://community.hpe.com/t5/servers-general/server-console-switch-1x8-problem/m-p/350548#M6730 <P>We have may of these switches and from time to time we find some that when connected to a TFT5600 and turned on shift the screen image over to the right about 1/2". This can be temp. fixed by reseting to factory settings on the TFT but when you close the TFT and open it again (on/off/on) it reverts back to the shifting problem.<BR />When I looked for a software update there is not one. Kind of makes the serial port useless! Suggestions?</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved from Servers &gt; Appliance Servers to Servers &gt; general - HP Forums Moderator</P> Fri, 23 Nov 2012 02:28:58 GMT https://community.hpe.com/t5/servers-general/server-console-switch-1x8-problem/m-p/350548#M6730 CA1113633 2012-11-23T02:28:58Z