https://community.hpe.com/t5/servers-general/ip-kvm-problem/m-p/427061#M6734 <P>We`ve recently bought four 0*2*16 port IP KVM switches. However I can connect to none of them via serial cable with hyperterminal.<BR />The conditions are the follows: 9600 bit,8 data, 1 stop, no parity, flow control none<BR />It was working on the 1*16 port switches in the past with the same serial port conditions.<BR />Serial cable: xxxxxxxxxx<BR />What could be the problem?<BR />Thanks,<BR /><BR />Krisztian</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved from Servers &gt; Appliance Servers to Servers &gt; general - HP Forums Moderator</P> Fri, 23 Nov 2012 02:32:54 GMT CA1185203 2012-11-23T02:32:54Z https://community.hpe.com/t5/servers-general/ip-kvm-problem/m-p/427061#M6734 <P>We`ve recently bought four 0*2*16 port IP KVM switches. However I can connect to none of them via serial cable with hyperterminal.<BR />The conditions are the follows: 9600 bit,8 data, 1 stop, no parity, flow control none<BR />It was working on the 1*16 port switches in the past with the same serial port conditions.<BR />Serial cable: xxxxxxxxxx<BR />What could be the problem?<BR />Thanks,<BR /><BR />Krisztian</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved from Servers &gt; Appliance Servers to Servers &gt; general - HP Forums Moderator</P> Fri, 23 Nov 2012 02:32:54 GMT https://community.hpe.com/t5/servers-general/ip-kvm-problem/m-p/427061#M6734 CA1185203 2012-11-23T02:32:54Z