HP RT3000 G2 UPS - Shutdown timing problems

upietz — Thu, 07 Nov 2013 17:02:53 GMT

Hello everyone,

after some searching in the the forums and finding some entries similar to my problem but no solutions I'm posting this as a new topic.

We're deploying some newly ordered RT3000 G2 ups and are in the middle of configuring them. They're equipped with Network Management Cards and have been loaded for about a week before the tests. The "Shutdown Parameters" settings on the NMC are:

- UPS: ...if remaining backup time under 120s

- LS1: after 99999s / battery capacity under 10%

- LS2: after 99999s / battery capacity under 10%

- OS shutdown time 120s

Now, if I pull the cable the UPS shuts down way before that- according to the NMC logs at 25% battery capacity and 19mn remaining runtime. The load remains constantly at 9%.

Are there any other settings I might be missing? Or am I expecting the wrong results? I'd be thankful for any pointers.

Stefan

topic HP RT3000 G2 UPS - Shutdown timing problems in Servers - General

HP RT3000 G2 UPS - Shutdown timing problems