topic Re: 10gbe pass-thru module in Servers - General

10gbe pass-thru module

tas7154 — Fri, 09 Nov 2018 22:02:45 GMT

I don't know if this is the right place to post this...

We have a refurbed c7000 with 2x 10GbE Pass-Thru Modules and I cannot figure out how to configure them. I have read both the manual for the c7000 and for the modue itself which keeps refering to a doc I can not find. I am looking for some direction on how to configure a management ip and port mapping. Nothing seems to work for setting this up via the OA or in the CLI.

Thanks

Re: 10gbe pass-thru module

Brian_Dsouza — Sat, 10 Nov 2018 09:11:47 GMT

Hi @tas7154 ,

Please try posting in the Server channel. Forums-- >Servers and Operating Systems

Re: 10gbe pass-thru module

parnassus — Sat, 10 Nov 2018 11:17:40 GMT

@tas7154 wrote: I have read both the manual for the c7000 and for the modue itself which keeps refering to a doc I can not find.

Are you referring to the HP Architecture and technologies in the HP BladeSystem c7000 Enclosure Technical white paper (4AA4-8125ENW, August 2014, Rev. 1)?

I can't find a link to it right now BUT...there is this link that point to the HPE October 2018, Rev. 4 edition of the same Technical white paper with updated links at the end for additional informations.