topic Re: Dos boot disk in Networking

Dos boot disk

Ian Morris_1 — Wed, 23 Jun 2004 11:51:11 GMT

I'm trying to create dos boot disks for DL380 G1's, G2's and G3's to enable rebuilds from network shares.
Itappears to bind to the cards but then it just freezes. I am using the Q57.dos driver but could do with a little help.

Re: Dos boot disk

Martin Balaj — Thu, 24 Jun 2004 02:05:16 GMT

Trz this site http://www.nu2.nu/bootdisk/network/ or use odi driver .

Re: Dos boot disk

Norman_21 — Thu, 24 Jun 2004 03:41:04 GMT

Hello,

resolution

Perform the following:

To prevent or correct the "Error 53" problem, use a text editor to edit the CONFIG.SYS file to remove the NOEMS switch from the EMM386.EXE entry as follows:

DEVICE=A:\NET\EMM386.EXE

When EMM386 memory manager is loaded with the NOEMS switch disabled, the "net use" command will then allow connection to the network share.

To prevent or correct the "Error 8" problem, a memory manager such as EMM386.EXE must be used. Ensure that the following entry is included in the CONFIG.SYS file:
DEVICE=A:\NET\EMM386.EXE

Read here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_CO020906_CW01&prodTypeId=15351&prodSeriesId=316587&locale=en_US

Hope this help