https://community.hpe.com/t5/networking/remote-downlevel-document-error-message/m-p/2819174#M335 I have an HP Laserjet 3200 networked between 3 PC's each running on XP. No JetDirect Print Server is installed. The printer is connected only to my PC. <BR /><BR />When I try to print from any of the 'guest' PC's, the print job leaves the guest PC and then becomes visible in the Printer job listing in my PC and I get the above print error message. <BR /><BR />HP tell me that the printer has been properly installed but that the problem lies with Windows, yet I have an Epsom on one of the guest PC's that prints fine from any of the 3 PC's. <BR /><BR />The only way that I can get the document to print is to reboot my PC (the one that the printer is attached to). Upon reboot, the printer then prints the document.<BR /><BR />Any help / advice would be greatly appreciated. Fri, 04 Oct 2002 12:21:53 GMT Stephen_39 2002-10-04T12:21:53Z https://community.hpe.com/t5/networking/remote-downlevel-document-error-message/m-p/2819174#M335 I have an HP Laserjet 3200 networked between 3 PC's each running on XP. No JetDirect Print Server is installed. The printer is connected only to my PC. <BR /><BR />When I try to print from any of the 'guest' PC's, the print job leaves the guest PC and then becomes visible in the Printer job listing in my PC and I get the above print error message. <BR /><BR />HP tell me that the printer has been properly installed but that the problem lies with Windows, yet I have an Epsom on one of the guest PC's that prints fine from any of the 3 PC's. <BR /><BR />The only way that I can get the document to print is to reboot my PC (the one that the printer is attached to). Upon reboot, the printer then prints the document.<BR /><BR />Any help / advice would be greatly appreciated. Fri, 04 Oct 2002 12:21:53 GMT https://community.hpe.com/t5/networking/remote-downlevel-document-error-message/m-p/2819174#M335 Stephen_39 2002-10-04T12:21:53Z https://community.hpe.com/t5/networking/remote-downlevel-document-error-message/m-p/2819175#M336 is that shared on a dot4 port? if yes, you could try to add a driver/share with LPT1 instead. <BR /><BR />Petr Mon, 28 Oct 2002 14:48:33 GMT https://community.hpe.com/t5/networking/remote-downlevel-document-error-message/m-p/2819175#M336 petr jaeger 2002-10-28T14:48:33Z