https://community.hpe.com/t5/networking/manage-hp2524m-switch-network/m-p/3136923#M931 Get Procurve Manager from HP. It is free and should do what you want. You will need to allow SNMPv2 with Community String public and you need to have the management IP address in VLAN1 if you use VLANs. ALso make sure you have the PC where Procurve runs listed in the Security section if you use Security.<BR /><BR /><A href="http://www.hp.com/rnd/products/management/pcm/summary.htm" target="_blank">http://www.hp.com/rnd/products/management/pcm/summary.htm</A><BR /><BR />Ron Fri, 05 Dec 2003 10:34:40 GMT Ron Kinner 2003-12-05T10:34:40Z https://community.hpe.com/t5/networking/manage-hp2524m-switch-network/m-p/3136922#M930 My network is based on 4 switches 2524m star connected whith optic fiber. I would see the map of my network to see, for every switch, the mac address and the ip address of the <BR />node(s) associated to every port. <BR />Is it possible? if yes, how can i?<BR />grazie Fri, 05 Dec 2003 03:52:45 GMT https://community.hpe.com/t5/networking/manage-hp2524m-switch-network/m-p/3136922#M930 antonio di paolo 2003-12-05T03:52:45Z https://community.hpe.com/t5/networking/manage-hp2524m-switch-network/m-p/3136923#M931 Get Procurve Manager from HP. It is free and should do what you want. You will need to allow SNMPv2 with Community String public and you need to have the management IP address in VLAN1 if you use VLANs. ALso make sure you have the PC where Procurve runs listed in the Security section if you use Security.<BR /><BR /><A href="http://www.hp.com/rnd/products/management/pcm/summary.htm" target="_blank">http://www.hp.com/rnd/products/management/pcm/summary.htm</A><BR /><BR />Ron Fri, 05 Dec 2003 10:34:40 GMT https://community.hpe.com/t5/networking/manage-hp2524m-switch-network/m-p/3136923#M931 Ron Kinner 2003-12-05T10:34:40Z