https://community.hpe.com/t5/network-attached-storage-nas/rebuilding-nas-e7000-v2/m-p/4009106#M1014 I'm trying to rebuild a couple of test Nas e700 v2 servers using the NAS e7000 v2 Quick Restore DVD. However when it goes through the boot process it fails with the error thst the server is not recognised as a HP Sstorsgeworks NAS Server Tue, 29 May 2007 10:29:22 GMT greg barr_2 2007-05-29T10:29:22Z https://community.hpe.com/t5/network-attached-storage-nas/rebuilding-nas-e7000-v2/m-p/4009106#M1014 I'm trying to rebuild a couple of test Nas e700 v2 servers using the NAS e7000 v2 Quick Restore DVD. However when it goes through the boot process it fails with the error thst the server is not recognised as a HP Sstorsgeworks NAS Server Tue, 29 May 2007 10:29:22 GMT https://community.hpe.com/t5/network-attached-storage-nas/rebuilding-nas-e7000-v2/m-p/4009106#M1014 greg barr_2 2007-05-29T10:29:22Z https://community.hpe.com/t5/network-attached-storage-nas/rebuilding-nas-e7000-v2/m-p/4009107#M1015 Hi,<BR />I beleive you need to contact HP Engineer to enter proper product id in the RBSU.<BR /><BR />Rgds,<BR />Vivek Tue, 29 May 2007 22:59:56 GMT https://community.hpe.com/t5/network-attached-storage-nas/rebuilding-nas-e7000-v2/m-p/4009107#M1015 Vivekjaiswal001 2007-05-29T22:59:56Z