topic Re: AIO600 and iSCSI acceleration setup? in Network Attached Storage (NAS) - Enterprise

AIO600 and iSCSI acceleration setup?

Vladimir Vybiral_1 — Fri, 06 Apr 2007 03:27:01 GMT

Hello, I have problems setting up the acceleration on the embedded NIC of AiO600. The Acceleration Pack license installed OK, created the iSCSI device (I can see it both in the NCU and SCSI adapters), I can ping the IP address set to the iSCSI accelerated device from the client, but the iSCSI target software does not show the device as network interface (when I open S iSCSI target, right click on the target, Properties, I have just the "non-accelerated" NIC IP address there - so the accelerated device's IP is not responding to iSCSI requests.

I have been trying to find the acceleration setup for AiO in the documentation but failed...

any help or thought highly appreciated, thanks.

Vladimir

Re: AIO600 and iSCSI acceleration setup?

Anselm Wenner — Mon, 12 Oct 2009 06:33:36 GMT

hi, my last info i got was that the TOE feature is for initiator(client) mode only not for target

Re: AIO600 and iSCSI acceleration setup?

Vladimir Vybiral_1 — Mon, 12 Oct 2009 10:52:44 GMT

hello,
I forgot to close the thread, it is pretty old - but You are right. the acceleration works for initiator side only. regards, V.

Re: AIO600 and iSCSI acceleration setup?

Vladimir Vybiral_1 — Mon, 12 Oct 2009 10:53:22 GMT

thread closed