https://community.hpe.com/t5/network-attached-storage-nas/nas-e7000-supported-driver-matrix/m-p/3168498#M217 There is no matrix available, but if the Proliant server supports the HBA then you can use it on the NAS. Smart Start should list out the correct Windows HBA driver for the server.<BR /><BR />The e7000 v1 used the DL580G1 and the e7000 v2 used the DL580G2. Both of these NAS versions use Windows 2000, so you would need to match up DL580 and Windows 2000 in Smart Start. Fri, 23 Jan 2004 15:49:36 GMT Chuck Manger 2004-01-23T15:49:36Z https://community.hpe.com/t5/network-attached-storage-nas/nas-e7000-supported-driver-matrix/m-p/3168497#M216 Is there a matrix available of supported NAS configuration drivers for Compaq HBAs? Tue, 20 Jan 2004 07:56:14 GMT https://community.hpe.com/t5/network-attached-storage-nas/nas-e7000-supported-driver-matrix/m-p/3168497#M216 Pete Kelly 2004-01-20T07:56:14Z https://community.hpe.com/t5/network-attached-storage-nas/nas-e7000-supported-driver-matrix/m-p/3168498#M217 There is no matrix available, but if the Proliant server supports the HBA then you can use it on the NAS. Smart Start should list out the correct Windows HBA driver for the server.<BR /><BR />The e7000 v1 used the DL580G1 and the e7000 v2 used the DL580G2. Both of these NAS versions use Windows 2000, so you would need to match up DL580 and Windows 2000 in Smart Start. Fri, 23 Jan 2004 15:49:36 GMT https://community.hpe.com/t5/network-attached-storage-nas/nas-e7000-supported-driver-matrix/m-p/3168498#M217 Chuck Manger 2004-01-23T15:49:36Z