https://community.hpe.com/t5/network-attached-storage-nas/b2000-predictive-disk-failure/m-p/3231470#M271 I have a HP NAS b2000. About a two weeks ago I noticed the LED saying it was in a state of failure. I rebooted it and it went to an ok state and then to a state of predictive failure where it has been ever since. I haven"t noticed any performance issues and can"t find any other errors that might coorespond to it. I am not sure if it is really the hardware or if it is the error checking that is bad.<BR /> Fri, 26 Mar 2004 18:09:20 GMT Clark Lawrence 2004-03-26T18:09:20Z https://community.hpe.com/t5/network-attached-storage-nas/b2000-predictive-disk-failure/m-p/3231470#M271 I have a HP NAS b2000. About a two weeks ago I noticed the LED saying it was in a state of failure. I rebooted it and it went to an ok state and then to a state of predictive failure where it has been ever since. I haven"t noticed any performance issues and can"t find any other errors that might coorespond to it. I am not sure if it is really the hardware or if it is the error checking that is bad.<BR /> Fri, 26 Mar 2004 18:09:20 GMT https://community.hpe.com/t5/network-attached-storage-nas/b2000-predictive-disk-failure/m-p/3231470#M271 Clark Lawrence 2004-03-26T18:09:20Z https://community.hpe.com/t5/network-attached-storage-nas/b2000-predictive-disk-failure/m-p/3231471#M272 Open a call and get the disk drive replaced. Predictive failure is there to act pro-active. Sat, 27 Mar 2004 07:02:52 GMT https://community.hpe.com/t5/network-attached-storage-nas/b2000-predictive-disk-failure/m-p/3231471#M272 Uwe Zessin 2004-03-27T07:02:52Z