topic Re: NAS8000 routing issue in Network Attached Storage (NAS) - Enterprise

NAS8000 routing issue

Saulius_1 — Wed, 11 Dec 2002 15:47:09 GMT

Hi,

Today I needed to add static route to the NAS8000, and I could not find routing tables changing command or GUI section. Does NAS8000 allow static routing ?

Maybe someone has already solved this issue ?

Saulius

Re: NAS8000 routing issue

Vincent Fleming — Thu, 12 Dec 2002 19:19:08 GMT

You can use the "invokeSystemTool" command to execute "route" commands.

For example, "invokeSystemTool route add default 1.2.3.4 1"

Please be very careful with this command, as you can damage the NAS8000 if you do something wrong.

Good luck!

Re: NAS8000 routing issue

Saulius_1 — Fri, 20 Dec 2002 06:59:40 GMT

It's very interesting, because I'm unable to find any description of this command in the command reference. Why ?

Saulius

Re: NAS8000 routing issue

Vincent Fleming — Fri, 20 Dec 2002 13:54:15 GMT

I found it in one of the reference guides that are available for download online from hp.com; offhand, I don't remember which one one.

You can go to hp.com, look up NAS8000 under products/storage, then look for "information library", it should be in there.

good luck,

Vince

Re: NAS8000 routing issue

Saulius_1 — Sat, 21 Dec 2002 06:02:04 GMT

Can't find anything like that :(.

Re: NAS8000 routing issue

Vincent Fleming — Sat, 21 Dec 2002 13:43:05 GMT

It's on pg 58 of the Command Reference manual:

http://h200004.www2.hp.com/bc/docs/support/SupportManual/lpg29281/lpg29281.pdf

The other manuals can be found at:

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&docIndexId=3124&locale=en_US&prodTypeId=12169&prodSeriesId=79204

Good luck,

Vince

Re: NAS8000 routing issue

Saulius_1 — Tue, 24 Dec 2002 09:13:42 GMT

I've got the point :). I was searching in manuals for version of NASOS 1.4.*, and the command was described in 1.5 ones.

Saulius