topic Re: how to get detail info of FC controller in HPE EVA Storage

how to get detail info of FC controller

Steve Khoo — Wed, 25 May 2005 10:12:44 GMT

How does one get detail info of FC contorller on HP-UX 11.00?

we are looking for something along the line of:

"HP A5158A PCI fibre 2Gps..."

print_manifest give this:

HP Tachyon TL/TS Fibre Channel Mass Storage Adapter
HP Tachyon XL2 Fibre Channel Mass Storage Adapter

and fcmsutil give this:

Vendor ID is = 0x00103c
Device ID is = 0x001029
XL2 Chip Revision No is = 2.2
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x00128c
Topology = PTTOPT_FABRIC
Link Speed = 2Gb
Local N_Port_id is = 0x011200
N_Port Node World Wide Name = 0x50060b000010449b
N_Port Port World Wide Name = 0x50060b000010449a
Driver state = ONLINE
Hardware Path is = 0/5/0/0
Number of Assisted IOs = 153108446
Number of Active Login Sessions = 1
Dino Present on Card = NO
Maximum Frame Size = 960
Driver Version = @(#) PATCH_11.00: libtd.a : Jul 15 2002, 11:34:12, PHSS_26798

Thanks,

Steve

Re: how to get detail info of FC controller

Alzhy — Wed, 25 May 2005 12:41:42 GMT

tdutil /dev/td0

tdlist /dev/td0

Re: how to get detail info of FC controller

Alzhy — Wed, 25 May 2005 12:47:04 GMT

and I forgot:

tddiag

all in /opt/fcmsutil/bin and specificlaly for HP Tachyon Based FC Cards.

Re: how to get detail info of FC controller

Cem Tugrul — Thu, 02 Jun 2005 03:00:53 GMT

Hi steve,

"tddiag" command gives very useful information when you have HP Tachyon drivers
on your system.
good luck,

Re: how to get detail info of FC controller

Steve Khoo — Tue, 14 Jun 2005 10:21:09 GMT

Sorry for the late reply. I was out of the country for a couple of weeks.

Those utils are great. Mucho info. But, how do I know that the part number for my PCI Tachyon card is A5158A? I know this only because one of my colleage mentioned it. tddiag does list the following in the swlist output:

12 A5158A B.11.00.10 PCI Tachyon TL/TS Fibre Channel

I assumed A5158A was the part number for the bundle.

Is there any other util that I can use to pull part number info from the Tachyon card?

Thanks,

Steve

Re: how to get detail info of FC controller

Sreedhar Nathani — Mon, 08 Aug 2005 09:31:57 GMT

Hello Steve,

You can use the following command to get the part number

#fcmsutil /dev/td0 vpd
example of the output
fcmsutil /dev/td0 vpd
V I T A L P R O D U C T D A T A
--------- ------------- -------

Product Discription :'A6795A 2Gbps/1Gbps Fibre Channel 4X PCI HBA'

Part number :'A6795-62001'

Engineering Date Code :'B-4322'

Part Serial number :'A56A00151392'

Misc. Information :'PW=15W'

Mfd. Date :'A-4302'

Check Sum : 0x5b

EFI version : '001.10'

Asset Tag :'NA'

Note : Replace the /dev/td0 with correct device file. You can get the device files with
#ioscan -fnCfc

Hope This helps