topic Re: Connecting AIX5.3 to a EVA5000 in HPE EVA Storage

Connecting AIX5.3 to a EVA5000

Morne Stevens — Thu, 07 Jul 2005 08:15:43 GMT

Good day

I am planning to connect a AIX5.3 (running on IBM 570) to a EVA 5000 running VCS 3.025.

What is the supported HBA (to be installed in the IBM 570) and multi-path software to allow for this connection.

Re: Connecting AIX5.3 to a EVA5000

Mads Storm Andersen — Thu, 07 Jul 2005 08:35:01 GMT

Hi,

AIX is not my strong side.
But for multi pathing software you should use:
"Antemeta Multipathing Software Solution for AIX" (358337-B21 if you need the part #)

And supported IBM HBA's are "FC6228,FC6239,FC5716"

And the "HP StorageWorks C2000 FC HBA" (A7539A) should work. The reason I write should is that it p.t only is listed as supporting 4.3.3/5.1 and 5.2.
Normally this only tells you that HP have not certified it yet.

/M

Re: Connecting AIX5.3 to a EVA5000

Peter Mattei — Sun, 10 Jul 2005 06:43:35 GMT

Well
There are two possibiliteies to run AIX on an EVA5000.

1. Using SecurePath and specialized HP/Cambex HBAs. See
www.compaq.com/products/quickspecs/11006_div/11006_div.HTML and
www.compaq.com/products/quickspecs/11402_div/11402_div.HTML

2. Using the Antemeta Multipathing Software Solution with original IBM HBAs see
www.compaq.com/products/quickspecs/12121_div/12121_div.HTML

Note that the SecurePath solution does currently not support AIX 5.3. That is expected in 3Q05.

Cheers
Peter

Re: Connecting AIX5.3 to a EVA5000

Morne Stevens — Mon, 11 Jul 2005 03:24:28 GMT

Thanks Guys

So SecurePath is NOT supported but will (3Q05) be and AntemetA does support AIX5.3 with the IBM 5716 HBA.