https://community.hpe.com/t5/hpe-eva-storage/rsm-pause-amp-continue/m-p/3603930#M13990 I recently upgraded my business from the evmcl to RSM v1.1. I used the evmcl to initiat snap clones from my hpux server for backups. Then after the backup was done, I would undo the snap clone. I am attempting to replicate this in RSM. I have set up Net::Telnet for perl, and am sucessfull in creating a snapshot. There is a pause in the job that I created from a template. I am unable to continue this job from Net::Telnet. It works with the GUI but not from Net::Telnet. Looking in the docs, it doesn't mention that you can from a telnet. Only GUI and CLUI. So how do I replicate the snap/undo behavior of my evmcl?<BR /><BR />TIA<BR /><BR />Brian Pyle Mon, 15 Aug 2005 09:16:27 GMT Brian Pyle 2005-08-15T09:16:27Z https://community.hpe.com/t5/hpe-eva-storage/rsm-pause-amp-continue/m-p/3603930#M13990 I recently upgraded my business from the evmcl to RSM v1.1. I used the evmcl to initiat snap clones from my hpux server for backups. Then after the backup was done, I would undo the snap clone. I am attempting to replicate this in RSM. I have set up Net::Telnet for perl, and am sucessfull in creating a snapshot. There is a pause in the job that I created from a template. I am unable to continue this job from Net::Telnet. It works with the GUI but not from Net::Telnet. Looking in the docs, it doesn't mention that you can from a telnet. Only GUI and CLUI. So how do I replicate the snap/undo behavior of my evmcl?<BR /><BR />TIA<BR /><BR />Brian Pyle Mon, 15 Aug 2005 09:16:27 GMT https://community.hpe.com/t5/hpe-eva-storage/rsm-pause-amp-continue/m-p/3603930#M13990 Brian Pyle 2005-08-15T09:16:27Z