topic Re: Problems with Command View and MPIO in HPE EVA Storage

Problems with Command View and MPIO

Roell — Fri, 19 Aug 2005 10:19:28 GMT

Hi all,

i installed Command View for EVA and MPIO
on a DL380 G4. (Windows Server 2003 SE)

After installing MPIO, Command View can´t see the EVA. (3000)

Does Commad View need all Paths to the EVA ?

Thanks in advance !

Re: Problems with Command View and MPIO

Uwe Zessin — Fri, 19 Aug 2005 11:35:47 GMT

CV-EVA can work with a single path if it goes to the master controller, but MPIO should not filter the LUN 0 anyway.

Re: Problems with Command View and MPIO

Steven Clementi — Fri, 19 Aug 2005 12:54:33 GMT

Roell:

Do you have the latest versions installed?

I believe CV-EVA is up to 4.0.1 (assuming you have 4.x).

Also, which version of MPIO did you install?

Steven

Re: Problems with Command View and MPIO

Johannes Roell_1 — Mon, 22 Aug 2005 00:03:07 GMT

Hi,

its CV-Version 3.3 and MPIO Version 1.0

I tried it with version 4.0 of CV, but it
was the same..

Re: Problems with Command View and MPIO

Fredrik Uddin-Backman2 — Thu, 01 Sep 2005 04:06:50 GMT

Do you have EVA PLatform kit installed? You must use FC HBA driver from the kit and not the newer one from Proliant Support pack i think.

Re: Problems with Command View and MPIO

Roell — Thu, 01 Sep 2005 04:18:41 GMT

Thanks to all for your help !

I forgot to install HP SMIS BEVOR install
Command View.

If I install SMIS first, then Command View
and then MPIO, it works !