topic Re: OVSOM3.2 Off SMA, SMI-S, MPIO Basic, CVEVA4.1, W2k3 in HPE EVA Storage

OVSOM3.2 Off SMA, SMI-S, MPIO Basic, CVEVA4.1, W2k3

Gary crews — Tue, 30 Aug 2005 12:21:10 GMT

I have the above configuration (1) and am having trouble getting CIMOM to work. OVSOM automatically discovered the above CIMOM agent. But does not discover the EVAs. I configured the passphases on the CIMOM as well. Did I leave out something or is something not supported here?

I also have a 2nd SMA 2.1 (2) and installed hpSMISeva4_1 and EVA 4.1 on it as well, however OVSOM does not discover the SMA CIMOM. I tried starting the CIMOM service and it stops with no information.

I installed the Generic SMI-S DPI on (1)
hpSIMSeva4_1 on (1&2)
I did install the EVA DPI on (1) but took it off after reading it was not needed.

Re: OVSOM3.2 Off SMA, SMI-S, MPIO Basic, CVEVA4.1, W2k3

name_27 — Tue, 30 Aug 2005 14:23:21 GMT

Try to connect "old way", hp OpenView Management proxy.
I got it work.
CIMOM won't work me either.
OVSAM3.2, Off SMA 3.3.3, SMI-S

Re: OVSOM3.2 Off SMA, SMI-S, MPIO Basic, CVEVA4.1, W2k3

Gary crews — Tue, 30 Aug 2005 15:37:36 GMT

I read that the OffSMA config has to use
SMI-S - not true?

Re: OVSOM3.2 Off SMA, SMI-S, MPIO Basic, CVEVA4.1, W2k3

name_27 — Tue, 30 Aug 2005 16:23:36 GMT

think SMI-S is needed. I mean, don't use CIMOM as management proxy, use device type: Storage management appicance.