https://community.hpe.com/t5/hpe-eva-storage/hsg80-linux-agent/m-p/3919071#M23342 Platform kits for the HSG80 are currently available from:<BR /><A href="http://h18000.www1.hp.com/products/storageworks/acs/platformsolutionkits/index.html" target="_blank">http://h18000.www1.hp.com/products/storageworks/acs/platformsolutionkits/index.html</A><BR />and the only ones for Linux are Linux x86 (supported versions are documented in the Release Notes).<BR />Other alternatives open to you would be to use HSG80 Element Manager on a SAN Management Appliance if you have one or leaving a console permanently connected to the controllers maintenance port capturing the output, third party tools are available to then scan through this output looking for things like instance codes indicating a controller failure.<BR />Another alternative may be to present the CCL (Command Console LUN) to another node on the SAN (you'd have to check for support as to heterogeneous environment - see the SAN Design Guide documentation) and use this to monitor the HSG's. Thu, 01 Mar 2007 12:39:22 GMT Another Ex-DECcie 2007-03-01T12:39:22Z https://community.hpe.com/t5/hpe-eva-storage/hsg80-linux-agent/m-p/3919070#M23341 Now that my HSG80 is working with the DS20 (Alfaserver) and Debian Linux, i need a way to get notified when a disk fail.<BR />I have not found the SWCC agent for linux.<BR />Is there an agent that can be run on Debian Linux on Alpha platform?<BR />If not, does anybody know another way to get failure notifications?<BR /><BR />Thanks Fri, 29 Dec 2006 15:49:02 GMT https://community.hpe.com/t5/hpe-eva-storage/hsg80-linux-agent/m-p/3919070#M23341 Alvaro Consuegra 2006-12-29T15:49:02Z https://community.hpe.com/t5/hpe-eva-storage/hsg80-linux-agent/m-p/3919071#M23342 Platform kits for the HSG80 are currently available from:<BR /><A href="http://h18000.www1.hp.com/products/storageworks/acs/platformsolutionkits/index.html" target="_blank">http://h18000.www1.hp.com/products/storageworks/acs/platformsolutionkits/index.html</A><BR />and the only ones for Linux are Linux x86 (supported versions are documented in the Release Notes).<BR />Other alternatives open to you would be to use HSG80 Element Manager on a SAN Management Appliance if you have one or leaving a console permanently connected to the controllers maintenance port capturing the output, third party tools are available to then scan through this output looking for things like instance codes indicating a controller failure.<BR />Another alternative may be to present the CCL (Command Console LUN) to another node on the SAN (you'd have to check for support as to heterogeneous environment - see the SAN Design Guide documentation) and use this to monitor the HSG's. Thu, 01 Mar 2007 12:39:22 GMT https://community.hpe.com/t5/hpe-eva-storage/hsg80-linux-agent/m-p/3919071#M23342 Another Ex-DECcie 2007-03-01T12:39:22Z