topic Re: restore config BROCADE in HPE EVA Storage

restore config BROCADE

Mike Pechkin — Wed, 07 Feb 2007 09:54:40 GMT

hi,

brocade SAN switch
somebody pressed Control-R (Clear all) in ZoneAdmin in the browser. :)

how to restore config from memory (from flash) ???

Re: restore config BROCADE

Ivan Ferreira — Wed, 07 Feb 2007 10:11:24 GMT

Can you logon to the switch and run the following command:

cfgshow

If you still can see your zone information use:

cfgenable "config_name"
cfgsave

Re: restore config BROCADE

Mike Pechkin — Wed, 07 Feb 2007 10:13:43 GMT

bad!!

admin> cfgshow
Defined configuration:
no configuration defined

Effective configuration:
no configuration in effect

Re: restore config BROCADE

Stephen Kebbell — Wed, 07 Feb 2007 11:08:03 GMT

Hi,

yes it does look bad. If there's nothing defined or effective then there's nothing in flash. Did you backup your switch configuration at any time using configupload? This would have also saved zoning information. Otherwise you will have to recreate zoning manually.

Regards,
Stephen

Re: restore config BROCADE

Mike Pechkin — Wed, 07 Feb 2007 11:17:49 GMT

hi,

yeap, i will restore from backup

1. why soft clear-save-apply config without beep ?
2. i belived i could restore config from running config