https://community.hpe.com/t5/hpe-eva-storage/networker-error-message/m-p/3953568#M24249 NetWorker 7.3.2 error message reads: "Cannot create device;storage node enabler required." <BR /><BR />This message appears when I try to configure a drive after performing a device scan from networker console. In this setup, I have 6 dedicated storage node licenses. At the first phase, I had 6 storage nodes, 1 networker server with the license manager installed on it. I decommissioned a storage node later at a stage and added another storage node. It seems that one license was consumed by that server which I decommissioned. My question is, how I can make one license reusable after it is already consumed by a server which is not in production. <BR /><BR />Thanks in advance. Thu, 01 Mar 2007 02:58:29 GMT Coz 2007-03-01T02:58:29Z https://community.hpe.com/t5/hpe-eva-storage/networker-error-message/m-p/3953568#M24249 NetWorker 7.3.2 error message reads: "Cannot create device;storage node enabler required." <BR /><BR />This message appears when I try to configure a drive after performing a device scan from networker console. In this setup, I have 6 dedicated storage node licenses. At the first phase, I had 6 storage nodes, 1 networker server with the license manager installed on it. I decommissioned a storage node later at a stage and added another storage node. It seems that one license was consumed by that server which I decommissioned. My question is, how I can make one license reusable after it is already consumed by a server which is not in production. <BR /><BR />Thanks in advance. Thu, 01 Mar 2007 02:58:29 GMT https://community.hpe.com/t5/hpe-eva-storage/networker-error-message/m-p/3953568#M24249 Coz 2007-03-01T02:58:29Z