topic Re: MSA1000 return code 0x88 in HPE EVA Storage

MSA1000 return code 0x88

Anthony Hodge — Tue, 07 Aug 2007 15:30:40 GMT

Hi,
I'm having trouble with MSA1000 running in Exchange 2003 fully patched on a WIN2k3 server R2 also fully patched. Not in a cluster.

I am getting a ton of the following message in the event viewer
The Read Log SysEvent IOCTL failed to obtain an entry for Array Controller \Device\FibreArray0. Return status 0x88.

Any help would be greatly appreciated.

Re: MSA1000 return code 0x88

tkc — Wed, 08 Aug 2007 00:14:59 GMT

what's your msa1000 controller firmware? i suspect that could be the issue.

Re: MSA1000 return code 0x88

AwadheshPandey — Wed, 08 Aug 2007 01:38:51 GMT

check the same type problem.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1145395&admit=-682735245+1186555063748+28353475

Re: MSA1000 return code 0x88

Anthony Hodge — Wed, 08 Aug 2007 09:00:06 GMT

The firmware on the controller is version 7.00.

Re: MSA1000 return code 0x88

Tom Van der Aa — Mon, 20 Aug 2007 07:43:32 GMT

Hi,
I'm also getting this same message
I've got 2 DL380G5 in an Exchange cluster attached to a Modular SAN Array 1000.
This Warning event is logging every second 5 times from both nodes in the system event viewer.
OS = Windows 2003 Release 2 Enterprise.
Did anyone know how to solve this issue ?
Thanks !

Re: MSA1000 return code 0x88

Anthony Hodge — Mon, 20 Aug 2007 14:45:23 GMT

We solved this issue by simply rebooting the san and the servers. Reboot the san first though. This should help you. That is what we did and haven't seen the problem or error messages since.

Re: MSA1000 return code 0x88

Tom Van der Aa — Tue, 21 Aug 2007 06:40:39 GMT

Hi Anthony

Thanks for your feedback!
This morning I found aout that a reboot of the SAN isn't required (in my case). I disabled both HBA cards and performed a cold boot of the servers. When back online I found events about a configuration change in the Logical Drive 2 of the FibreArray0.. (status changed from Not configured to OK)