topic Re: How to Remove Discovered iSCSI Targets in command view EVA in HPE EVA Storage

How to Remove Discovered iSCSI Targets in command view EVA

Jollyjet — Sat, 08 Sep 2007 01:48:44 GMT

HI,

I was facing a problem in command view eva i need to remove one invalid ISCSI target in command view eva how do I proceed on that. Attached is the Image will show what is the unwanted target (ISCSI Controller1).

Re: How to Remove Discovered iSCSI Targets in command view EVA

Rob Leadbeater — Sat, 08 Sep 2007 08:36:18 GMT

Hi,

I'm not sure about removing it through the GUI, however there appears to be a method to do it with SSSU.

If you look at the user guide here:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00605847/c00605847.pdf

You'll see that you can do:

DELETE ISCSI_CONTROLLER "\Hardware\iSCSI Devices\iSCSI controller 1"

Hope this helps,

Regards,

Rob

Re: How to Remove Discovered iSCSI Targets in command view EVA

Jollyjet — Thu, 27 Sep 2007 06:30:09 GMT

Hi all,

I could not able to delete this Iscsi Controller via ssu I had upgraded the commandview version and tried that is not helpfull im attaching the err msg i got while deleting via sssu.

Re: How to Remove Discovered iSCSI Targets in command view EVA

Marian_13 — Sun, 14 Oct 2007 01:41:19 GMT

Hi Jollyjet,

have you been resolved this problem yet?
I have changed iSCSI Controller IP address and I have same problem.

Marian

Re: How to Remove Discovered iSCSI Targets in command view EVA

Jollyjet — Sun, 14 Oct 2007 23:38:23 GMT

Hi Marian,

The problem has got resolved.

steps to remove the discovered iscsi target.

1, upgrade the command view eva to 7.
2,change the ip address of the iscsi mpx to older ipaddress.
3,check whether you can able to delete the iscsi entry from command view eva
4,un present all the iscsi lun's from command view eva.
5,now you will able to get the delete option from command view eva
6,Change the iscsi ipaddress to new ipaddress, from command view eva click the discover iscsi controller and give the new iscsi ipaddress and recreate the luns you will be losing your data.

if any query revert me.

Re: How to Remove Discovered iSCSI Targets in command view EVA

Marian_13 — Mon, 15 Oct 2007 18:19:47 GMT

Hi Jollyjet,
thanks for reply.

The EVA4100 is running CV 7.0.
I was unable to delete iSCSI Controllers (don't matter which IP address I had) and same situation for LUNs.

Finaly, I reinizialized EVA, it's DEMO HW.

Marian