https://community.hpe.com/t5/hpe-eva-storage/msa1500cs-firmwareflash-from-w2000-server-advapi32-dll-error/m-p/4102931#M28369 I'm trying to use the MSA1500Flash utillty to upgrade the controller from ver. 5.10 to 5.20 and the MSA20 from 1.52 to 2.02.<BR /><BR />When I start the utility I get the following error:MSA.exe - Entry point not found<BR />X The procedure entry point TraceMessage could not be located in the dynamic link library ADVAPI32.dll<BR /><BR />(and HP web-site do not work) Thu, 15 Nov 2007 05:43:57 GMT Leif B. Rodland 2007-11-15T05:43:57Z https://community.hpe.com/t5/hpe-eva-storage/msa1500cs-firmwareflash-from-w2000-server-advapi32-dll-error/m-p/4102931#M28369 I'm trying to use the MSA1500Flash utillty to upgrade the controller from ver. 5.10 to 5.20 and the MSA20 from 1.52 to 2.02.<BR /><BR />When I start the utility I get the following error:MSA.exe - Entry point not found<BR />X The procedure entry point TraceMessage could not be located in the dynamic link library ADVAPI32.dll<BR /><BR />(and HP web-site do not work) Thu, 15 Nov 2007 05:43:57 GMT https://community.hpe.com/t5/hpe-eva-storage/msa1500cs-firmwareflash-from-w2000-server-advapi32-dll-error/m-p/4102931#M28369 Leif B. Rodland 2007-11-15T05:43:57Z https://community.hpe.com/t5/hpe-eva-storage/msa1500cs-firmwareflash-from-w2000-server-advapi32-dll-error/m-p/4102932#M28370 I know this is an old message. just wanted t report I'm getting the same error message on a Windows 2000 system. I've run all the updates and fixes I can find on this, but haven't found anything that resolves this issue.. Any suggestions would be appercaited. Thu, 03 Jun 2010 13:58:59 GMT https://community.hpe.com/t5/hpe-eva-storage/msa1500cs-firmwareflash-from-w2000-server-advapi32-dll-error/m-p/4102932#M28370 Dale_63 2010-06-03T13:58:59Z