https://community.hpe.com/t5/hpe-eva-storage/eva-6000-vdisk-host-access/m-p/4193913#M30614 Hi,<BR />1. you can do the rescan of the disks via the Disk Manager. If the disks are not visible, then you need to restart the cluster nodes :-(. But before the restart it is a good opportunity to install the MPIO DSM driver 3.00.00 - the latest (multipathing driver).<BR />2. After that you will see only 1 disk (without the MPIO you will see as many disks as many connections you have from the host to the EVA)<BR />3. Initialize the disk and create the partition<BR />4. define it in the MSCS cluster as a disk resource. Thu, 08 May 2008 16:41:13 GMT IBaltay 2008-05-08T16:41:13Z https://community.hpe.com/t5/hpe-eva-storage/eva-6000-vdisk-host-access/m-p/4193912#M30613 Hello...<BR />Can somebody please guide me...i have presented a vDisk to Windows cluster (host) through commandview EVA...now on the host side...how do i access the vdisk...how do i add/map the vdisk from host side.<BR />Thanx Thu, 08 May 2008 07:07:20 GMT https://community.hpe.com/t5/hpe-eva-storage/eva-6000-vdisk-host-access/m-p/4193912#M30613 Xishan 2008-05-08T07:07:20Z https://community.hpe.com/t5/hpe-eva-storage/eva-6000-vdisk-host-access/m-p/4193913#M30614 Hi,<BR />1. you can do the rescan of the disks via the Disk Manager. If the disks are not visible, then you need to restart the cluster nodes :-(. But before the restart it is a good opportunity to install the MPIO DSM driver 3.00.00 - the latest (multipathing driver).<BR />2. After that you will see only 1 disk (without the MPIO you will see as many disks as many connections you have from the host to the EVA)<BR />3. Initialize the disk and create the partition<BR />4. define it in the MSCS cluster as a disk resource. Thu, 08 May 2008 16:41:13 GMT https://community.hpe.com/t5/hpe-eva-storage/eva-6000-vdisk-host-access/m-p/4193913#M30614 IBaltay 2008-05-08T16:41:13Z