topic Re: How to sync SAN EVA4000 and XP24000 between 2 site? in HPE EVA Storage

How to sync SAN EVA4000 and XP24000 between 2 site?

nlhuynh — Fri, 22 Aug 2008 00:18:01 GMT

Hi Friends
I have 2 san EVA4000 and XP24000 in DataCenter
And now, I want building 2 system on 2 Site (DC and DR Site).
Can i use XP San in DC, and EVA in DR site?
and can I use CA licence to sync DataBase between it?
If don't can, what 's application i can use to satisfy my demand?
Thank a lot, friends

Re: How to sync SAN EVA4000 and XP24000 between 2 site?

IBaltay — Fri, 22 Aug 2008 04:12:08 GMT

Hi,
if you have the XP24000 on site too, then the CA synchronous mirror CA can be done via the XP external storage virtualization:
http://h18006.www1.hp.com/products/storage/software/extstxp/

shortly: both EVA4000 must be connected as the external storages to both XP24000 and then they will be virtualized and CA synchronized via the XP24000 as if they are the XP LDEVs.

Re: How to sync SAN EVA4000 and XP24000 between 2 site?

Amar_Joshi — Fri, 22 Aug 2008 17:09:09 GMT

I will suggest to go for a host based replication software (like Softek TDMF) and sync 2 volumes using ASYNC method.

If you use EVA as an external storage to XP, you will not be able to access the EVA storage once XP shuts down, which doesn't serve the DR purpose.

Re: How to sync SAN EVA4000 and XP24000 between 2 site?

nlhuynh — Mon, 25 Aug 2008 01:03:09 GMT

Hi
Thanks for your advices.
I know, if EVA is connected as the external Storage, i can use BC to sync Database.
however, i want sync at realtime with different location.
Thank you very much

Re: How to sync SAN EVA4000 and XP24000 between 2 site?

Simon Setina — Mon, 25 Aug 2008 05:25:44 GMT

Hi.

You can also use SAN based replication betwen two sites like Falconstor IPStor.

Regards
Simon

Re: How to sync SAN EVA4000 and XP24000 between 2 site?

nlhuynh — Mon, 25 Aug 2008 06:13:51 GMT

Hi Simon
Can you describe it?
Thanks

Re: How to sync SAN EVA4000 and XP24000 between 2 site?

Shrivastava Nitin — Thu, 19 Mar 2009 11:39:17 GMT

****may be its too late for this post ****

We use recoverpoint from EMC which enables SAN level replication instead of disk level hence we replicate IBM,HP, EMC from our primary DC to XP 24000 at the DR site.

Also now Cisco has come up with the SAN level replication, too

Hope this helps

Re: How to sync SAN EVA4000 and XP24000 between 2 site?

Hka_1 — Wed, 01 Dec 2010 19:40:02 GMT

hi Nitin,

could you share the process to configure XP24000 on RPA.

Thanks.