https://community.hpe.com/t5/hpe-eva-storage/how-to-interpret-drive-unit-capacity-in-msa1510i-adureport/m-p/4578576#M42728 Is there documentation somewhere on the content of this report? Some of these numbers simply can't be what they seem -- I have a logical unit of 4095MB and one of over 1TB, yet they have identical BlockSize and Blocks in a ratio 1:2.<BR /><BR />(My supervisor wants a SIMPLE report: total storage X, allocated Y, Z% full. I already pull the ADU report weekly via Expect driving SSH to capture config. data since the day we lost the config. while adding an MSA20, so I looked there first. The box doesn't respond to SNMP queries for HOST-RESOURCES-MIB so I can't get anything that way either. Is there *any* way to get these data programmatically without screen-scraping?)<BR /><BR />Firmware revision 1.32b200. Thu, 04 Feb 2010 20:48:50 GMT Mark H. Wood 2010-02-04T20:48:50Z https://community.hpe.com/t5/hpe-eva-storage/how-to-interpret-drive-unit-capacity-in-msa1510i-adureport/m-p/4578576#M42728 Is there documentation somewhere on the content of this report? Some of these numbers simply can't be what they seem -- I have a logical unit of 4095MB and one of over 1TB, yet they have identical BlockSize and Blocks in a ratio 1:2.<BR /><BR />(My supervisor wants a SIMPLE report: total storage X, allocated Y, Z% full. I already pull the ADU report weekly via Expect driving SSH to capture config. data since the day we lost the config. while adding an MSA20, so I looked there first. The box doesn't respond to SNMP queries for HOST-RESOURCES-MIB so I can't get anything that way either. Is there *any* way to get these data programmatically without screen-scraping?)<BR /><BR />Firmware revision 1.32b200. Thu, 04 Feb 2010 20:48:50 GMT https://community.hpe.com/t5/hpe-eva-storage/how-to-interpret-drive-unit-capacity-in-msa1510i-adureport/m-p/4578576#M42728 Mark H. Wood 2010-02-04T20:48:50Z