topic Re: Compatible with current FC hard disks? in HPE EVA Storage

Compatible with current FC hard disks?

R. van Hes — Fri, 30 Apr 2010 19:06:43 GMT

We have an EVA 6000 SAN Storage with 48 300 GB FC disks with model number BD30058232. The disks have Firmware version HP04. Al the disks are in the same Disk Group.

Whe have 16 new disks with model number BD300DAJZF. The disks are at this moment in the Ungrouped Disks. The disks have firmware HP00.

Can I add these disks to the same Disk group as the 48 another disks with firmware HP04 without upgrading the new harddisks firmware? Can i do this without expecting troubles?

Re: Compatible with current FC hard disks?

Mark... — Sat, 01 May 2010 10:18:34 GMT

Hi,
You should check the release notes for the version of code you are running to check for that information.
Why not just code load the new disks to the latest version before you put them in the disk group ???
You can also code load the existing grouped disk drives (if required) online as long as there are no Vraid 0 disk drives in the disk group. Supported by HP, just do it during a "quite" period.
Disk drive f/w bundle here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3351789&prodTypeId=329290&prodSeriesId=3302267&swLang=13&taskId=135&swEnvOID=54

Other disk drive info here:

http://h20000.www2.hp.com/bizsupport/site/search/r4_0/jsp/search.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=3302267&tx=BD30058232.

Mark...

Re: Compatible with current FC hard disks?

Víctor Cespón — Mon, 03 May 2010 11:37:48 GMT

Compatibility between disk models and firmwares:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01898270/c01898270.pdf