https://community.hpe.com/t5/hpe-eva-storage/command-view/m-p/4710626#M46763 When adding a new host to Command View what exactly is it doing when you add the host IP as dynamic or static? Mon, 08 Nov 2010 17:13:01 GMT Andy Guley 2010-11-08T17:13:01Z https://community.hpe.com/t5/hpe-eva-storage/command-view/m-p/4710626#M46763 When adding a new host to Command View what exactly is it doing when you add the host IP as dynamic or static? Mon, 08 Nov 2010 17:13:01 GMT https://community.hpe.com/t5/hpe-eva-storage/command-view/m-p/4710626#M46763 Andy Guley 2010-11-08T17:13:01Z https://community.hpe.com/t5/hpe-eva-storage/command-view/m-p/4710627#M46764 I have NEVER entered an address there (since January 2002 ;-)<BR />and I have NEVER seen any documentation why I should enter an address. Mon, 08 Nov 2010 19:42:00 GMT https://community.hpe.com/t5/hpe-eva-storage/command-view/m-p/4710627#M46764 Uwe Zessin 2010-11-08T19:42:00Z https://community.hpe.com/t5/hpe-eva-storage/command-view/m-p/4710628#M46765 That option doesn't seem to exist anymore in Command View 9.3, just the "Host name/IP address" dialog is left.<BR /><BR />I thought I saw a note somewhere which mentioned it was used for something to do with firmware updates. I can't find it now though so may have dreamt it.<BR /><BR /> Tue, 09 Nov 2010 10:49:02 GMT https://community.hpe.com/t5/hpe-eva-storage/command-view/m-p/4710628#M46765 CLEB 2010-11-09T10:49:02Z