https://community.hpe.com/t5/hpe-eva-storage/msa2012i-single-controller-volume-mapping-issue/m-p/4746909#M47876 Hi,<BR /><BR />I have 2 Vdisks with multiple volumes. 2 Windows hosts (cluster) and 1 ESX server connect to the Vdisks.<BR /><BR />I created 4 new volumes and mapped them to the 2 windows servers (Server 2003 SP2 using MS iSCSI).<BR /><BR />My hosts cannot see the volumes.<BR /><BR />I set it so all hosts can view the volume to test, but again none of the hosts can see it.<BR /><BR />Firmware is J210P23 on storage controller A and W421P31 on the management controller.<BR /><BR />Anyone any ideas?<BR /><BR />Thanks Tue, 01 Feb 2011 14:43:05 GMT Gary Flanagan 2011-02-01T14:43:05Z https://community.hpe.com/t5/hpe-eva-storage/msa2012i-single-controller-volume-mapping-issue/m-p/4746909#M47876 Hi,<BR /><BR />I have 2 Vdisks with multiple volumes. 2 Windows hosts (cluster) and 1 ESX server connect to the Vdisks.<BR /><BR />I created 4 new volumes and mapped them to the 2 windows servers (Server 2003 SP2 using MS iSCSI).<BR /><BR />My hosts cannot see the volumes.<BR /><BR />I set it so all hosts can view the volume to test, but again none of the hosts can see it.<BR /><BR />Firmware is J210P23 on storage controller A and W421P31 on the management controller.<BR /><BR />Anyone any ideas?<BR /><BR />Thanks Tue, 01 Feb 2011 14:43:05 GMT https://community.hpe.com/t5/hpe-eva-storage/msa2012i-single-controller-volume-mapping-issue/m-p/4746909#M47876 Gary Flanagan 2011-02-01T14:43:05Z