topic Re: HP EVA 4400 Management Module in HPE EVA Storage

HP EVA 4400 Management Module

Kim Easland — Fri, 08 Apr 2011 13:32:20 GMT

We recently had a power outage and now we are unable to get to the EVA 4400 Management Module with the assigned IP address or the default address. Is there a way to see what the ip address of the Management Module is?

Re: HP EVA 4400 Management Module

Johan Guldmyr — Fri, 08 Apr 2011 17:29:17 GMT

Can you not access the WOCP or CV?
If not, it may be hard.

Only way I see it would try to do some switch networking magic, like check MAC-address and maybe a reverse lookup.. but:

There is a little pin-button at the back that you can use to reset the IP-address to the default.

A reseat of the module might get it back as well.

Re: HP EVA 4400 Management Module

Kim Easland — Fri, 08 Apr 2011 17:40:28 GMT

This won't erase any of our san configuration, because everything is running okay we are just not able to get on the Management Module.

Re: HP EVA 4400 Management Module

Johan Guldmyr — Sat, 09 Apr 2011 04:38:27 GMT

No it will not reset the SAN configuration.

Another thing you can do is to install Command View on a physical server.

But it might be a good idea to ask HP support for some help.

Re: HP EVA 4400 Management Module

Sivaramakrishna_1 — Sun, 10 Apr 2011 14:31:42 GMT

Hi,

Some of the known issues with Management Modules, IP Address of that module will not ping after power reset.

You can reset the management module IP by press and Hold the "Reset" Button on the module for 5-10 seconds.

The IP wil be reset to 192.168.0.1 and user name is admin with no password.

Once reset you can login with default credentials and set the IP and user/password again.