https://community.hpe.com/t5/hpe-eva-storage/cannot-see-emc-disks/m-p/4860470#M50106 Whoops - EMC dude had useed the node WWN not the port in his lun masks - OK now.<BR /><BR /> Fri, 10 Sep 2004 12:35:15 GMT Tony Scully_3 2004-09-10T12:35:15Z https://community.hpe.com/t5/hpe-eva-storage/cannot-see-emc-disks/m-p/4860469#M50105 Anyone seen this before - EMC are stumped at the moment.<BR /><BR />Mix of RP8420 and RP3440 systems FC connected via switches to an EMC DMX801 array.<BR /><BR />HP-UX 11.11 December 2004 with all patch bundles June 2004 on all hosts.<BR /><BR />RP8420s have 2 x A9784A Combo SAN/LAN cards and the RP3440 have dual ported A6826A cards, all at driver versuion 11.11.03.<BR /><BR />PowerPath 4.2.0 installed on all hosts.<BR /><BR />All I can see are the 23Mb devices that hold the VCM database, down all paths.<BR /><BR />We have tripled checked zoning and masking.<BR /><BR />A SUN V440 on the same SAN can see its disks happily.<BR /><BR />Its 17:40 on Friday afternoon here, so any help is GREATLY appreciated!<BR /><BR />Cheers,<BR /><BR />Tony. Fri, 10 Sep 2004 11:39:19 GMT https://community.hpe.com/t5/hpe-eva-storage/cannot-see-emc-disks/m-p/4860469#M50105 Tony Scully_3 2004-09-10T11:39:19Z https://community.hpe.com/t5/hpe-eva-storage/cannot-see-emc-disks/m-p/4860470#M50106 Whoops - EMC dude had useed the node WWN not the port in his lun masks - OK now.<BR /><BR /> Fri, 10 Sep 2004 12:35:15 GMT https://community.hpe.com/t5/hpe-eva-storage/cannot-see-emc-disks/m-p/4860470#M50106 Tony Scully_3 2004-09-10T12:35:15Z