topic Re: Storageworks San Switch 2/8 default password required.... in HPE EVA Storage

Storageworks San Switch 2/8 default password required....

Jez Rice — Mon, 24 Jul 2006 15:41:17 GMT

I have a live novell 6 cluster on an msa1000 based switch fabric with various other servers/library. I urgently need to add an extra node to run as a three node cluster before a faulty node is removed.
It looks as though zoning has been implmented on the switches as well as acl on the controllers.
Using the web based switch interface I can tell that the new hba is visible on the fabric but no zone is being applied by default.
I do not know the telnet login for the switches and so cannot check the zoning setup.
Can anyone please confirm the default UN & PW and a possible way to reset these to default if changed.
Thx

Re: Storageworks San Switch 2/8 default password required....

Luk Vandenbussche — Mon, 24 Jul 2006 15:48:44 GMT

Jez,

Default UID : admiin
Default PW : password

Re: Storageworks San Switch 2/8 default password required....

Luk Vandenbussche — Mon, 24 Jul 2006 15:48:56 GMT

Jez,

Default UID : admin
Default PW : password

Re: Storageworks San Switch 2/8 default password required....

Jez Rice — Mon, 24 Jul 2006 15:51:48 GMT

Thanks for the confirmation but it hasn't worked.
Unfortunatley there is no documentation for this SAN setup so I cannot tell what they may have been changed to..
Is there a way to reset the UN & PW to default?

Re: Storageworks San Switch 2/8 default password required....

Frantisek Kysela — Mon, 24 Jul 2006 17:25:57 GMT

Hi Jez,
You can try using accounts "factory" or "root". Default password is "password". You can change the admin password with the "passwddefault" command.

Frantisek

Re: Storageworks San Switch 2/8 default password required....

Frantisek Kysela — Mon, 24 Jul 2006 17:35:49 GMT

Hi again,
if previous was not working, You can try password "fibranne" for user root.
If nor it not work you must contact Brocade to get the Password Recovery Procedure. It is a special firmware especialy made for your switch You need know a switch WWN for this procedure.

Frantisek

Re: Storageworks San Switch 2/8 default password required....

Jez Rice — Tue, 25 Jul 2006 02:05:05 GMT

Thx a million.
The correct password was fibranne