topic Re: How to install Secure Path 4C in HPE EVA Storage

How to install Secure Path 4C

PT_3 — Thu, 12 Feb 2004 18:26:44 GMT

I have to install Secure Patch 4C over 4B for about 10 servers. Do I have to disconnect the server from the SAN first? Do anything in particular?

I have been reading the installation instruction but all it says is "run setup".

Thanks

Re: How to install Secure Path 4C

Clint Placette_2 — Fri, 13 Feb 2004 14:32:29 GMT

I can only speak about Windows 2000 and 2003. The upgrade was uneventful and all my servers stay attached to The EVA and MSA.

Re: How to install Secure Path 4C

PT_3 — Fri, 13 Feb 2004 15:44:47 GMT

I also have windows 2000 and 2003. So all you had to do was reboot after the installation right?

Re: How to install Secure Path 4C

nor-aiza ahmad — Thu, 15 Apr 2004 04:37:38 GMT

My experience is:
0. Shut down the server-disable san switch port-power up the server
1. Disable the SAN switch port connecting to the hba(s)
2. Stop Secure Path Agent services
3. Uninstall Secure Path 4B
4. Reboot the server
5. Install Secure Patch 4C
6. Shutdown the server
7. Enable the SAN switch port for the hba
8. Power up the server

Re: How to install Secure Path 4C

bencruise — Fri, 16 Apr 2004 03:46:30 GMT

see the release note for secure path 4.0c, it's useful for it.