topic Re: View RSS numbers and indexes in Command View in HPE EVA Storage

View RSS numbers and indexes in Command View

Andy Benegas — Wed, 19 Aug 2009 13:36:42 GMT

We have an EVA4000 firmware version 6.100 and we are using Command View v8.00. We are not able to see the RSS numbers and indexes.

I know that we were able to see the RSS numbers and indexes when the EVA4000 was initially installed. I cannot recall the version of the firmware or Command View.

Is this something that has changed recently?

Re: View RSS numbers and indexes in Command View

Uwe Zessin — Wed, 19 Aug 2009 15:23:09 GMT

I still see them in CV 6.0.2, so they must have removed them in 7.0.

Re: View RSS numbers and indexes in Command View

Mark... — Thu, 20 Aug 2009 08:39:27 GMT

Hi
Yes, the RSS info was removed from the properties of a Vdisk satrting with CV 7.0.
You can still get the info in a few ways.
One is to use SSSU and you can get the info from there. Just do an "ls disk full" if I remember correctly.
Mark...

Re: View RSS numbers and indexes in Command View

Andy Benegas — Thu, 20 Aug 2009 13:14:50 GMT

Thanks for the information. I will give SSSU a try.