https://community.hpe.com/t5/hpe-eva-storage/hp-storageworks-fca2354-error-recovery-settings/m-p/3226486#M5963 Hi,<BR /><BR />While installing our NSR M2402 i came upon the following challange. I would like to set ResetTPRLO=1, so the FCA will send a "Target Reset" instead of a "Third Party Process Logout (TPRLO)". But i can't find the place were to do this. <BR /><BR />Am using HP Tru64 UNIX 5.1B PK3 on a ES45 with a FCA-2354 : Driver Rev 2.06 : F/W Rev 3.91A1(1.20A0)<BR /><BR />Anyone?<BR /><BR /><BR /><BR /><BR /> Tue, 23 Mar 2004 02:34:07 GMT Eric van Dijken 2004-03-23T02:34:07Z https://community.hpe.com/t5/hpe-eva-storage/hp-storageworks-fca2354-error-recovery-settings/m-p/3226486#M5963 Hi,<BR /><BR />While installing our NSR M2402 i came upon the following challange. I would like to set ResetTPRLO=1, so the FCA will send a "Target Reset" instead of a "Third Party Process Logout (TPRLO)". But i can't find the place were to do this. <BR /><BR />Am using HP Tru64 UNIX 5.1B PK3 on a ES45 with a FCA-2354 : Driver Rev 2.06 : F/W Rev 3.91A1(1.20A0)<BR /><BR />Anyone?<BR /><BR /><BR /><BR /><BR /> Tue, 23 Mar 2004 02:34:07 GMT https://community.hpe.com/t5/hpe-eva-storage/hp-storageworks-fca2354-error-recovery-settings/m-p/3226486#M5963 Eric van Dijken 2004-03-23T02:34:07Z