Problem with the controler enclosure ID 0 and disk grouped on EVA 4400

SVautherot — Wed, 03 Apr 2013 14:23:01 GMT

Hi,

we added a new controler enclosure on our EVA 4400 which already has 3 enclosures.

The enclosure was badly connected to the existant loop and the consequence is the ID's new enclosure = 0.

The next step, was to group the new disks of the enclosure in existing groups.

Results :

the status's disks of the new enclosure is "WARNING POPULATED". We can see them in the MANAP Command View, but when we click on the disk, this message appears : "Object not found. Operation on this object is completed".

another information is "Status code of EVA : 14003: Object not found in View"

Could you tell us how to change the ID of the new enclosure without loosing datas on new disks ?

Do you have any other solution ?

Best regards,

Re: Problem with the controler enclosure ID 0 and disk grouped on EVA 4400

Torsten. — Wed, 03 Apr 2013 14:33:26 GMT

>> without loosing datas on new disks

Do you already have data on the disks? This means they are already grouped? This worked?

Has another shelf ID 0 too?

topic Problem with the controler enclosure ID 0 and disk grouped on EVA 4400 in HPE EVA Storage

Problem with the controler enclosure ID 0 and disk grouped on EVA 4400

Re: Problem with the controler enclosure ID 0 and disk grouped on EVA 4400