https://community.hpe.com/t5/hpe-eva-storage/msa1500cs-with-bad-disk/m-p/6024823#M63304 <P>i have the following MSA Setup</P><P>MSA100CS, dual 1510i controllers, 2 MSA20 cages.&nbsp;&nbsp; 24 1TB disks.</P><P>we had two disks go out last month, one disk was replaced and it rebuild itself back.. however one bay refuses to accept new disk, we tried several new disks and still comes up as a bad disk.&nbsp;</P><P>&nbsp;</P><P>how can i check if its the disk, bay, backboard or cage having issues?</P> Tue, 09 Apr 2013 17:00:44 GMT nbirrueta 2013-04-09T17:00:44Z https://community.hpe.com/t5/hpe-eva-storage/msa1500cs-with-bad-disk/m-p/6024823#M63304 <P>i have the following MSA Setup</P><P>MSA100CS, dual 1510i controllers, 2 MSA20 cages.&nbsp;&nbsp; 24 1TB disks.</P><P>we had two disks go out last month, one disk was replaced and it rebuild itself back.. however one bay refuses to accept new disk, we tried several new disks and still comes up as a bad disk.&nbsp;</P><P>&nbsp;</P><P>how can i check if its the disk, bay, backboard or cage having issues?</P> Tue, 09 Apr 2013 17:00:44 GMT https://community.hpe.com/t5/hpe-eva-storage/msa1500cs-with-bad-disk/m-p/6024823#M63304 nbirrueta 2013-04-09T17:00:44Z https://community.hpe.com/t5/hpe-eva-storage/msa1500cs-with-bad-disk/m-p/6024973#M63305 <P>This could be a midplane issue, to confirm get a ADU report generated from the host. In ADU report locate the drive that is faulty and check parameters such as hard read error, hard write errors and other important drive parameters.</P> Tue, 09 Apr 2013 20:23:32 GMT https://community.hpe.com/t5/hpe-eva-storage/msa1500cs-with-bad-disk/m-p/6024973#M63305 PAC-MAN 2013-04-09T20:23:32Z