Upgrading SAN network advisor from 11.1.0 to 12.0.2 fails at DB migration

UlfZimmermann — Thu, 11 Jul 2013 15:06:34 GMT

I have now tried several times to upgrade my DCFM installation from 10.4.5 to 11.1.0 to 12.0.2. There is still a bug in the installer, which runs "df -P" to determine how much space is available. On RHEL5 this leads to not working (it can't grok with the ouput of df havng a K at the end). To work around that I have a script in place which makes sure that df gets called with "df -P -k" which removes the K.

After solving that problem I was able to upgrade from 10.4.5 to 11.1.0. The installer for 12.0.2 runs fine through the install also. But when I get to "smc" and the DB migration it starts it, works on it for a couple minutes and then comes back with:

Migration failed. Please click Cancel to quit. Your could run the configuration by clicking on /opt/HP_B-series_SAN_Network_Advisor12_0_2/bin/smc

If I run smc again, the DB migration immediatly fails. Where can I find a log or debug output to figure out why the DB migration fails?

Re: Upgrading SAN network advisor from 11.1.0 to 12.0.2 fails at DB migration

jitter77 — Wed, 24 Jul 2013 11:14:20 GMT

Hello UlfZimmermann,

Try to lookup "<installation dir>/logs/cw.log" for more information.

topic Upgrading SAN network advisor from 11.1.0 to 12.0.2 fails at DB migration in HPE EVA Storage

Upgrading SAN network advisor from 11.1.0 to 12.0.2 fails at DB migration

Re: Upgrading SAN network advisor from 11.1.0 to 12.0.2 fails at DB migration