topic Re: Problem: disappeared lun on the blade server. in HPE EVA Storage

Problem: disappeared lun on the blade server.

Zilatov — Mon, 02 Dec 2013 11:27:23 GMT

Hello.

That's what we have in stock:
- Hp BladeSystem c7000 + 7 blade servers ProLiant BL460c Gen8
- Hp p6300 eva + 2 pieces HP D2600
- Hp STORAGEWORKS 8/24 SAN SWITCH
- Hp cloud system Matrix

What's the problem:

6 blade suddenly disappeared disk mounted as lun. Where to start? Where to look?

Re: Problem: disappeared lun on the blade server.

PAC-MAN — Mon, 02 Dec 2013 16:16:14 GMT

First I would go to Blade onboard Administrator and check if all the blades including Virtual connect, blade switches are OK. then login to SAN switch and check the port stats. if everything is OK, then login to command view and check individual vdisk status.

Re: Problem: disappeared lun on the blade server.

Zilatov — Tue, 03 Dec 2013 07:43:18 GMT

Checked everything and everything is normal. But the sixth blade can not mount at all no lun.

Re: Problem: disappeared lun on the blade server.

Bobby_Atlas — Tue, 03 Dec 2013 08:00:45 GMT

Actually my collegue was a little but wrong.

Let me describe more what we have here.

First of all yes, as he said we have Blade system with blades inside. Also EVA P6350 with 3 disk enclosures connected to it. Its okay. Then we have MSL Tape library attached via SAN. Matrix stays above this infrastructure and also VC Enterprise installed on this MATRIX server. When i'm looking on matrix web interface - all SAN ports are OK and green. I was checked toghether with HP engeneers and we found that port doesn't getting profile from VC. But it also show me that all ok.

All other servers are working fine, but 6th blade have no vision on SAN (this blade have installed Veritas on it and not virtualized). This blade have no connection to SAN it all. I was tryed to remove server profile from port on matrix and assaign it again - no luck.

Re: Problem: disappeared lun on the blade server.

PAC-MAN — Tue, 03 Dec 2013 11:52:12 GMT

Bobby,

Thanks for the detailed explanation of the infra. To me this doesn't sound like a SAN or HP cloud system matrix issue. If that blade is not virtualized then its obvious that problem lies within the blade. Did you check the embedded HBA on that blade?

Re: Problem: disappeared lun on the blade server.

Zilatov — Tue, 10 Dec 2013 07:34:56 GMT

Please tell me how to do it.

Re: Problem: disappeared lun on the blade server.

PAC-MAN — Tue, 10 Dec 2013 19:23:45 GMT

Launch hbanywhere or sansurfer HBA utility depending on the manufacturer. if it says the the card is failed or any issues with that card you can contact HP support to troubleshoot further.

Re: Problem: disappeared lun on the blade server.

Zilatov — Fri, 27 Dec 2013 15:05:36 GMT

Thank you for your help. Came to us from PE specialist and it turned out that the motherboard burned port HBA. After replacing lun visible on the server.

Re: Problem: disappeared lun on the blade server.

Zilatov — Fri, 27 Dec 2013 15:06:10 GMT

Sorry, from HP :)

Re: Problem: disappeared lun on the blade server.

PAC-MAN — Sun, 29 Dec 2013 15:56:57 GMT

Awesome!