Support for booting from SAN

RogerVI — Mon, 19 Jan 2015 07:12:49 GMT

I,
I have a storage array EVA P6500 Dual Controller FC and 1 GB iSCSI (AJ939A) in fabric mode with two switches FC brocade 300 (SAN Switch HP 8/24) with several servers connected to these switches using FC HBAs. The connections is 8 Gb/s
I want to install a linux server with their SO in the SAN (boot from SAN)

My question is:
Is it possible booting from SAN with the array and the switches listed above ?

Please, provide me any clues according your experience.

Thanks in advance,
Roger

p.S. This thread has eben moved from General to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

Re: Support for booting from SAN

Torsten. — Fri, 26 Apr 2013 06:15:46 GMT

You need to go into the FC HBA BIOS of the server and adjust the boot settings.

topic Support for booting from SAN in HPE EVA Storage

Support for booting from SAN

Re: Support for booting from SAN