topic Re: Replacing HSV200-A Controller in HPE EVA Storage

Replacing HSV200-A Controller

toufikz — Mon, 10 Oct 2016 16:09:26 GMT

Hi ,

It 's the first time I use this forum.

I 'm looking for the procedure to replace a controller (HSV200-A) in a redondant configuration (EVA 4000 with 2 Controllers HSV200-A and an FC enclosure ).

Thanks and Best Regards!

Re: Replacing HSV200-A Controller

Torsten. — Mon, 10 Oct 2016 16:35:21 GMT

shut down the bad controller. transfer the flash memory card. connect power cables only, fans, batteries and power on. if you see input WWN after a while, the controller is good. power off, connect all cables and power on.

Re: Replacing HSV200-A Controller

toufikz — Mon, 10 Oct 2016 16:48:31 GMT

Hi Torsten,

Thanks alot for answering quickly.

Can you tell me how to proceed so as to transfer the flash memory card from old controller to the new one , I don't know how is it !

Thanks !

Re: Replacing HSV200-A Controller

Torsten. — Mon, 10 Oct 2016 18:45:34 GMT

open the little door at the rear side between (10) and (3) and pull the card: